▼
EXP
These bolted cross-pad clamps are intended for making connections between stranded conductors/stems and pads. These clamps should not be used as adaptors.
- To connect a flat terminal to a stranded conductor by bolting palm to terminal and bolting conductor .
- Recommended fasteners M12 GR. 8.8 HDG torque to 45Nm.
- All terminal, palm and conductor surfaces to be cleaned with stainless steel wire brush and a suitable conductive grease applied before use.
- Material: Cast aluminium.
- Supplied in clear, sealed, heavy duty, UV stabilezed plastic bag.
- Cat. no. to stamped on the product.
Catalog Pages
