The Optical Tension Device is designed for pulling OPGW fiber cable to final sag tension. Once the final sag has been achieved, a permanent type dead-end device should be installed promptly, followed by the removal of the tensioning device.

• OPGW Cable Range:  8.890 - 20.820 mm / .350 - .820 inches
• Load Rating:  50% of the rated cable breaking strength or 5,000 lbs. (22.4 kN) whichever is less.

Application Procedures

SP-3078 (FIBERLIGN® Optical Tension Device)

Catalog Pages

FIBERLIGN® Optical Tension Device - Catalog