▼
GUY-GRIP® Dead-end
The PREFORMEDTM Guy-Grip Dead End is recommended for stay termination on wood pole construction. They are suitable for stay rod, stay insulator and pole top attachment, single, multiple and flying stays can be terminated.
PREFORMEDTM Guy-Grip Dead Ends are designed for the termination of stays up to 27m in length. Big Grip Dead Ends are recommended for stays exceeding 27m in length. PREFORMEDTM Big Grip Dead Ends are available for a wide range of strand sizes.
Guy-Grip Dead Ends are intended for strand termination. For termination of wire rope, Big Grip WIre Rope Dead Ends are specified.
PREFORMEDTM Guy-Grip Dead Ends are made of material compatible with the strand to which they are applied.
Lay direction must be the same as that of the outer layer of the strand with which it is used.
The loop of the Guy-Grip Dead End is designed for use with thimbles and stay rod eyes having smooth contours, diameters and groove widths which will adequately support the loop of the fitting.
For detailed method of installation refer to application instructions.
Application Procedures
SP-3263 (GUY-GRIP Dead-End - Multiple Down Guys)
Preformed Line Products (GB) Ltd. Catalogue Pages
Guy-Grip Dead End - Transmission and Distribution Catalogue
Corporate Catalogue Pages
Preformed Line Products (GB) Ltd. Part Tables:
