▼
The Aluminum Suspension (ALS) Clamp is intended for use on all aluminum-based conductors. PLP recommends placing Armor Rods over the conductor at suspension points to minimize the static and dynamic stresses at the ends of the clamp as well as extend the life of the conductor. The standard ALS Clamps are designed for continuous conductor operating temperatures up to 125°C (150°C for two-hour emergencies).
Material
Features
Application Procedures
SP3414 - Aluminum Suspension Clamp
Sales Materials
Aluminum Suspension Clamp - Sell Sheet
Catalog
| Catalog Number | Conductor range inches (mm) | Bolt Torque | |
| Min. | Max. | ||
| ALS-47 | 0.200 (5.1) | 0.470 (11.9) | 11 ft-lbs (15 Nm) |
| ALS-67 | 0.471 (11.9) | 0.670 (17.0) | 19 ft-lbs (26 Nm) |
| ALS-91 | 0.671 (17.0) | 0.910 (23.1) | 37 ft-lbs (50 Nm) |
| ALS-122 | 0.911 (23.1) | 1.220 (31.0) | 40 ft-lbs (55 Nm) |
| ALS-181 | 1.221 (31.0) | 1.810 (46.0) | 40 ft-lbs (55 Nm) |
| ALS-236 | 1.811 (46.0) | 2.360 (59.9) | 40 ft-lbs (55 Nm) |
The Aluminum Suspension (ALS) Clamp is intended for use on all aluminum-based conductors. PLP recommends placing Armor Rods over the conductor at suspension points to minimize the static and dynamic stresses at the ends of the clamp as well as extend the life of the conductor. The standard ALS Clamps are designed for continuous conductor operating temperatures up to 125°C (150°C for two-hour emergencies).
Material
Features
Application Procedures
SP3414 - Aluminum Suspension Clamp
Sales Materials
Aluminum Suspension Clamp - Sell Sheet
Catalog
| Catalog Number | Conductor range inches (mm) | Bolt Torque | |
| Min. | Max. | ||
| ALS-47 | 0.200 (5.1) | 0.470 (11.9) | 11 ft-lbs (15 Nm) |
| ALS-67 | 0.471 (11.9) | 0.670 (17.0) | 19 ft-lbs (26 Nm) |
| ALS-91 | 0.671 (17.0) | 0.910 (23.1) | 37 ft-lbs (50 Nm) |
| ALS-122 | 0.911 (23.1) | 1.220 (31.0) | 40 ft-lbs (55 Nm) |
| ALS-181 | 1.221 (31.0) | 1.810 (46.0) | 40 ft-lbs (55 Nm) |
| ALS-236 | 1.811 (46.0) | 2.360 (59.9) | 40 ft-lbs (55 Nm) |
The Aluminum Suspension (ALS) Clamp is intended for use on all aluminum-based conductors. PLP recommends placing Armor Rods over the conductor at suspension points to minimize the static and dynamic stresses at the ends of the clamp as well as extend the life of the conductor. The standard ALS Clamps are designed for continuous conductor operating temperatures up to 125°C (150°C for two-hour emergencies).
Material
Features
Application Procedures
SP3414 - Aluminum Suspension Clamp
Sales Materials
Aluminum Suspension Clamp - Sell Sheet
Catalog
| Catalog Number | Conductor range inches (mm) | Bolt Torque | |
| Min. | Max. | ||
| ALS-47 | 0.200 (5.1) | 0.470 (11.9) | 11 ft-lbs (15 Nm) |
| ALS-67 | 0.471 (11.9) | 0.670 (17.0) | 19 ft-lbs (26 Nm) |
| ALS-91 | 0.671 (17.0) | 0.910 (23.1) | 37 ft-lbs (50 Nm) |
| ALS-122 | 0.911 (23.1) | 1.220 (31.0) | 40 ft-lbs (55 Nm) |
| ALS-181 | 1.221 (31.0) | 1.810 (46.0) | 40 ft-lbs (55 Nm) |
| ALS-236 | 1.811 (46.0) | 2.360 (59.9) | 40 ft-lbs (55 Nm) |
