The Splice Shunt is designed to restore up to 100% electrical conductivity and a portion of the mechanical strength to the compression splices that are found to be excessively hot or failing during thermal line inspections.

• Rods are sub-setted into groups for ease of application
• Rods are made of high strength, high conductivity, aluminum alloy
• Center section is “cabled” tightly to pass over a splice or around a dead-end/terminal assembly
• Conductive grit on inner surface of rods assure electrical contact with cleaned conductor surface.
• Thermal Rating (Continuous) - 125°C ACSR, AAC, AAAC and 250°C ACSS, ACCR
• Installs by hand or with hot sticks
• Lightweight
• Installs directly over compression splices or compression dead-ends
• Restores conductivity to all-aluminum, aluminum alloy and ACSR conductors

Application Procedures

SP-2734 (Splice/Dead-end Shunt)

SP-3185-1 Dead-end Shunt with Dead-end (Single Configuration)

Catalog Pages

Splice/Dead-end Shunt - Catalog

Sales Materials

Splice/Dead-end Shunt - Sell Sheet

Reports & Manuals

Transmission Line Repair Manual