Distribution Ties manufactured of aluminum covered steel secure conductors in the top groove of interchangeable headstyle insulators.  They can accommodate conductor diameters from .190" to 1.585" for F neck insulators and .190" to 1.240" for other size insulators as long as the insulator top groove is large enough.

• Provide an improved method of securing conductor compared to clamp-top insulators or hand ties over Armor Rods
• Provides superior abrasion protection for the conductor under all types of motion
• The tube component surrounds the bare conductor with a resilient cushion
• Plast Line Ties are also offered as an alternate to metal ties applied over plastic jacketed conductor

Application Procedures

SP-2833 (Distribution Tie)

Catalog Pages

Distribution Tie - Catalog

Insulator/Tie Fit Information Sheet

For use on: ACSR, Compacted ACSR, Aluminum Alloy, All-Aluminum, AWAC® Compacted All-Aluminum, C-Neck Interchangeable Headstyle Insulators

(ANSI 55-2 Pin, ANSI 55-3 Pin, 2-1/4" Neck Diameter)

For use on: ACSR, Compacted ACSR, Aluminum Alloy, All-Aluminum, AWAC® Compacted All-Aluminum, F-Neck Interchangeable Headstyle Insulators

(ANSI 55-4 Pin, ANSI 55-5 Pin, ANSI 57-1 Pin, ANSI 57-2 Pin, ANSI 57-3 Pin, 2-7/8" Diameter)

For use on: ACSR, Compacted ACSR, Aluminum Alloy, All-Aluminum, AWAC® Compacted All-Aluminum, J-Neck Interchangeable Headstyle Insulators

(ANSI 55-6 Pin, ANSI 55-7 Pin, ANSI 56-1 Pin, 3-1/2" Diameter)

For use on: ACSR, Compacted ACSR, Aluminum Alloy, All-Aluminum, AWAC® Compacted All-Aluminum, K-Neck Interchangeable Headstyle Insulators

(ANSI 56-2 Pin, ANSI 56-3 Pin, 4" Neck Diameter)

EXPLANATORY NOTES:

(1) Nominal Conductor size indicates one of various conductors within each range.

(2) For the succeeding conductors ranges, the insulator's top groove radius should be at least as large as shown above.

(3) AWAC is a registered trademark of the Copperwld Co.